Povrchy/Funkcie

GBIE SubstratesGBIE sa venuje vývoju najkvalitnejších lakov na akýkoľvek povrch na svete. Ak ešte nemáme povrchovú úpravu vyhovujúcu vášmu projektu, vytvoríme ju priamo pre vás úplne od začiatku.

GBIE rozlišuje medzi priľnavosťou laku povlaku a vlastnosťami / funkciami laku. Najprv musíme nastaviť adekvátnu adhéziu a potom formulujeme požadované vlastnosti.

Priľnavosť

Laky SLIP-COAT môžu dokonale priľnú na:

  • TPE: TPE, TPO, TPV
  • EPDM: hustý, špongiový, formovací, mikrodenzný, vodivý, farebný
  • PVC: pružnejšie alebo menej pružné
  • Iné: naše laky sa používajú aj na iné podklady, ktoré z konkurenčných dôvodov nezverejňujeme. Kontaktujte nás, a zistite, či môžu naše laky pridať hodnotu aj vašim výrobkom alebo vyriešiť vaše problémy.

Na priľnutie k rôznym typom podkladu sa používajú rôzne bázy. Neexistuje totiž jeden univerzálny produkt, ktorý by bol aplikovateľný na všetkých podkladoch. Výskumné a vývojové laboratórium GBIE je zriadené s cieľom pomôcť našim zákazníkom rýchlo identifikovať optimálnu priľnavosť laku na konkrétny podklad.

Vlastnosti/funkcie

Vlastnosti lakov SLIP-COAT:

  • Nízky až žiadny hluk (škrípanie alebo vŕzganie): Spojovacie plochy sa môžu pohybovať vzhľadom na dokonalé tesnenie s minimálnym alebo žiadnym hlukom.
  • Nízky koeficient trenia: Proti sklu, lakovanému plechu, iným potiahnutým tesneniam, plastu, koži a iným povrchom.
    Krycia schopnosť: Krytá deliaca čiara medzi tvarovaným detailom a extrúziou; prekryté nedostatky na povrchu výliskov alebo líšt.
  • Nízky lesk.
  • Textúra: Laky sa komerčne predávajú v hrubých, stredných a jemných textúrach, ako aj v hladkých povrchoch. Tieto rôzne textúry môžu pomôcť vyriešiť akékoľvek problémy a poskytnúť dizajnérom zaujímavú estetiku pre dokonalý finálny produkt.
  • Nízka úroveň obrusovania povrchov: Kvalitnými výrobkami dokážeme predísť aj tomuto neduhu, naše laky majú viac ako 25 rokov skúseností v teréne na stovkách vozidiel bez akýchkoľvek problémov s obrusovaním povrchov.
  • Haptické: Celkový pocit z laku je extrémne dôležitý. Laky SLIP-COAT nikdy nepôsobia mastným dojmom. Široká paleta rôznych povrchov vytvára rôzne textúry, ktoré je niekedy veľmi ťažké opísať, ako je napríklad hodvábna alebo maslová.

Spray Gun pngLaky, ktorým môžete plne dôverovať za každých okolností Kontaktovať GBIE

EPDM Sponge & Dense (ethylene propylene diene monomer)

Substrate Function Coating Properties Location Comments
anti-squeak Anti-itch Abrasion Resistance Ice Release Low Coefficient of Friction Low Gloss Release Coating Weathering Low Paint Abrasion Visible or Decorative Glass Run
4. EPDM Sponge & Dense Used on convertibles with water leak problems
5. EPDM Sponge Smooth and soft
6. EPDM Sponge Smooth and soft
7. EPDM Sponge & Dense Glass release, UV tracer
8. EPDM Sponge & Dense Excellent for low paint abrasion
9. EPDM Dense Grey colour on black EPDM for interior trim
10. EPDM Dense Tan colour on black EPDM for interior trim
11. EPDM Sponge & Dense UV Tracer
13. Dense EPDM Low gloss with mar resistance
14. EPDM DCX black colour match, smooth
15. EPDM Ford YGYH black colour match, smooth
19. EPDM Sponge & Dense Low gloss with mar resistance
20. EPDM Sponge & Dense Low gloss with mar resistance
21. PU-RIM & EPDM Sponge Abrasion resistance in a sandy environment, UV tracer
22. PU-RIM & EPDM Sponge No N-methylpyrrolidinone (NMP)
22. EPDM Sponge
24. EPDM Sponge & Dense Fine grained particulated coating
26. EPDM Sponge & Dense Room temperature cure
27. TPE EPDM PP Weathering grade
32. EPDM Sponge & Dense Buttery Soft Black
33. EPDM Dense Buttery Soft Touch
34. EPDM Dense Exceptionally Buttery Soft Touch
35. EPDM Dense Clear buttery soft
Notes: = good, = very good, = excellent, = world class
no symbol indicates that the parameter has never been evaluated.
Use
of Crosslinkers Part B, Part B1, Part B3, or Part B4 with the Part A
components listed above, depends on the fabricators process/substrate
combination.

Back To Top

 

Flexible PVC (polyvinyl chloride)

Substrate Function Coating Properties Location Comments
anti-squeak Anti-itch Abrasion Resistance Ice Release Low Coefficient of Friction Low Gloss Release Coating Weathering Low Paint Abrasion Visible or Decorative Glass Run
1. Flexible PVC
2. Flexible PVC Overspray onto coloured PVC is not visible
3. Flexible PVC Soft texture and decorative
Notes: = good, = very good, = excellent, = world class
no symbol indicates that the parameter has never been evaluated.
Use
of Crosslinkers Part B, Part B1, Part B3, or Part B4 with the Part A
components listed above, depends on the fabricators process/substrate
combination.

Back To Top

 

PU-RIM (Polyurethane reaction injection molding)

Substrate Function Coating Properties Location Comments
anti-squeak Anti-itch Abrasion Resistance Ice Release Low Coefficient of Friction Low Gloss Release Coating Weathering Low Paint Abrasion Visible or Decorative Glass Run
12. PU-RIM
Notes: = good, = very good, = excellent, = world class
no symbol indicates that the parameter has never been evaluated.
Use
of Crosslinkers Part B, Part B1, Part B3, or Part B4 with the Part A
components listed above, depends on the fabricators process/substrate
combination.

Back To Top

 

Nitrile Rubber

Substrate Function Coating Properties Location Comments
anti-squeak Anti-itch Abrasion Resistance Ice Release Low Coefficient of Friction Low Gloss Release Coating Weathering Low Paint Abrasion Visible or Decorative Glass Run
16. Nitrile Rubber Release coating for metal coils (nitrile coated)
Notes: = good, = very good, = excellent, = world class
no symbol indicates that the parameter has never been evaluated.
Use
of Crosslinkers Part B, Part B1, Part B3, or Part B4 with the Part A
components listed above, depends on the fabricators process/substrate
combination.

Back To Top

 

Vyram

Substrate Function Coating Properties Location Comments
anti-squeak Anti-itch Abrasion Resistance Ice Release Low Coefficient of Friction Low Gloss Release Coating Weathering Low Paint Abrasion Visible or Decorative Glass Run
17. Vyram
Notes: = good, = very good, = excellent, = world class
no symbol indicates that the parameter has never been evaluated.
Use
of Crosslinkers Part B, Part B1, Part B3, or Part B4 with the Part A
components listed above, depends on the fabricators process/substrate
combination.

Back To Top

 

Santoprene (55 – 80 durometer)

Substrate Function Coating Properties Location Comments
anti-squeak Anti-itch Abrasion Resistance Ice Release Low Coefficient of Friction Low Gloss Release Coating Weathering Low Paint Abrasion Visible or Decorative Glass Run
18. Santoprene (55 – 80 duro) No paint abrasion
Notes: = good, = very good, = excellent, = world class
no symbol indicates that the parameter has never been evaluated.
Use
of Crosslinkers Part B, Part B1, Part B3, or Part B4 with the Part A
components listed above, depends on the fabricators process/substrate
combination.

Back To Top

 

TPE and SEBS-TPE (thermoplastic elastomer and styrene ethylene butylene styrene – thermoplastic elastomer)

Substrate Function Coating Properties Location Comments
anti-squeak Anti-itch Abrasion Resistance Ice Release Low Coefficient of Friction Low Gloss Release Coating Weathering Low Paint Abrasion Visible or Decorative Glass Run
23. SEBS-TPE No paint abrasion
25. TPE Sponge Sealer for open cell sponge
27. TPE EPDM PP Weathering grade
29. TPE Upholstery 500% Elongation at first crack
31. TPE Upholstery Room temp. cure, 500% elongation
Notes: = good, = very good, = excellent, = world class
no symbol indicates that the parameter has never been evaluated.
Use
of Crosslinkers Part B, Part B1, Part B3, or Part B4 with the Part A
components listed above, depends on the fabricators process/substrate
combination.

Back To Top

 

PP polypropylene

Substrate Function Coating Properties Location Comments
anti-squeak Anti-itch Abrasion Resistance Ice Release Low Coefficient of Friction Low Gloss Release Coating Weathering Low Paint Abrasion Visible or Decorative Glass Run
27. TPE EPDM PP Weathering grade
Notes: = good, = very good, = excellent, = world class
no symbol indicates that the parameter has never been evaluated.
Use
of Crosslinkers Part B, Part B1, Part B3, or Part B4 with the Part A
components listed above, depends on the fabricators process/substrate
combination.

Back To Top

 

PE polyethylene

Substrate Function Coating Properties Location Comments
anti-squeak Anti-itch Abrasion Resistance Ice Release Low Coefficient of Friction Low Gloss Release Coating Weathering Low Paint Abrasion Visible or Decorative Glass Run
PE Sponge
Notes: = good, = very good, = excellent, = world class
no symbol indicates that the parameter has never been evaluated.
Use
of Crosslinkers Part B, Part B1, Part B3, or Part B4 with the Part A
components listed above, depends on the fabricators process/substrate
combination.

Back To Top

 

Silicone Rubber

Substrate Function Coating Properties Location Comments
anti-squeak Anti-itch Abrasion Resistance Ice Release Low Coefficient of Friction Low Gloss Release Coating Weathering Low Paint Abrasion Visible or Decorative Glass Run
Silicone Rubber Very high temp. resistance for sunroof seals
Notes: = good, = very good, = excellent, = world class
no symbol indicates that the parameter has never been evaluated.
Use
of Crosslinkers Part B, Part B1, Part B3, or Part B4 with the Part A
components listed above, depends on the fabricators process/substrate
combination.

Back To Top

 

Spray Gun pngLaky, ktorým môžete plne dôverovať za každých okolností Kontaktovať GBIE

Kontaktovať GBIE

Ústredie

4461 Concession 4 North, R.R.#4
Amherstburg, Ontario
Kanada N9V 2Y9

Tel: (519) 736-7344
Fax: (519) 736-7345
Email: slip-coat@gbie.com
Európska pobočka: G.B.I.E. GmbH

Bettinastraße 30
D-60325 Frankfurt/Main

Tel: +49 (0) 69 9 74 61 – 362
Fax: +49 (0) 69 9 74 61 – 150